About
Introduction:
TMC-40 fluorinated liquid is a colorless transparent perfluorinated chemical that is inert and has high dielectric strength and thermal conductivity. It also has low surface tension. It is mainly used in semiconductor manufacturing fabs as a heat transfer fluid. Other uses include power electronics, high-performance computing, heat transfer for data centers, and aviation electronics. The operating temp range is - 57°C to 166°C. It is primarily used in etching equipment, ion implantation equipment, testing, and other equipment. Because TMC-40 is a single component, it resists degradation over time.
Applications
Electronic Testing, Gross Leak Testing, Heat Transfer, Dielectric Bath, Semiconductor Cooling, Thermal Shock Testing
TMC-40 is a direct replacement for 3M™ FC-40.
Physical Properties
Appearance |
Clear, colorless liquid |
Molecular Weight |
650 (g/mol) |
Boiling Point |
165 (°C) |
Pour Point |
-57 (°C) |
Vapor Pressure |
290 (Pa) |
Density |
1.856 (g/cm3) |
Kinematic Viscosity |
2.2 (cSt) |
Absolute Viscosity |
4.1 (cP) |
Liquid Specific Heat |
1100 (J/Kg-1°C-1) |
Liquid Thermal Conductivity |
0.065 (W/m °C-1) |
Dielectric Constant |
1.9 |
Volume Resistant |
~1012 (Ohm-cm) |
Coefficient of Expansion |
0.0012 (°C-1) |
Refractive Index |
1.29 |
Surface Tension |
16 (mN/m) |
Dielectric Strength |
>40Kv |
Ozone Depletion Potential |
0 |
Flash Point |
None |
Toxicity Properties
TMC-40 is virtually non-irritating to the eyes and skin. The product also demonstrates very low toxicity and was not mutagenic. Please see the SDS of TMC-40 for detailed information.
Materials Compatibility
TMC-40 is compatible with most metals, plastics, and elastomers, please contact TMC Industries, Inc. for further recommendations and technical assistance.
Recycle and Reclaim Options
TMC Industries Inc. reclaim service provides significant savings over the cost of new fluid and helps protect the environment by drastically reducing the amount of your waste stream.
Reduce your hazardous waste disposal and achieve better environmental stewardship. TMC Industries, Inc. properly disposes of the contaminants.
Quality Assurances
We guarantee our reclaimed solvents to have new qualities and performance capabilities. To support our confidence, pre- and post-processing analytical data accompanies each shipment.
Save on Disposal Costs
Reduce your hazardous waste disposal. Have TMC Industries reclaim your contaminated fluids to their original state and purity and return them to you at about 1/3 the cost of replacing them with new fluids.
[Size Chart]
Passed 3rd Party Laboratory Testing: Non Detectable PFAS |
[End Size Chart]
[Custom Product Tab]
TMC-40 TDS Technical Datasheet |
For Safety Datasheet (SDS), please contact us! |
Introduction:
TMC-40 fluorinated liquid is a colorless transparent perfluorinated chemical that is inert and has high dielectric strength and thermal conductivity. It also has low surface tension. It is mainly used in semiconductor manufacturing fabs as a heat transfer fluid. Other uses include power electronics, high-performance computing, heat transfer for data centers, and aviation electronics. The operating temp range is - 57°C to 166°C. It is primarily used in etching equipment, ion implantation equipment, testing, and other equipment. Because TMC-40 is a single component, it resists degradation over time.
Applications
Electronic Testing, Gross Leak Testing, Heat Transfer, Dielectric Bath, Semiconductor Cooling, Thermal Shock Testing
TMC-40 is a direct replacement for 3M™ FC-40.
Physical Properties
Appearance |
Clear, colorless liquid |
Molecular Weight |
650 (g/mol) |
Boiling Point |
165 (°C) |
Pour Point |
-57 (°C) |
Vapor Pressure |
290 (Pa) |
Density |
1.856 (g/cm3) |
Kinematic Viscosity |
2.2 (cSt) |
Absolute Viscosity |
4.1 (cP) |
Liquid Specific Heat |
1100 (J/Kg-1°C-1) |
Liquid Thermal Conductivity |
0.065 (W/m °C-1) |
Dielectric Constant |
1.9 |
Volume Resistant |
~1012 (Ohm-cm) |
Coefficient of Expansion |
0.0012 (°C-1) |
Refractive Index |
1.29 |
Surface Tension |
16 (mN/m) |
Dielectric Strength |
>40Kv |
Ozone Depletion Potential |
0 |
Flash Point |
None |
Toxicity Properties
TMC-40 is virtually non-irritating to the eyes and skin. The product also demonstrates very low toxicity and was not mutagenic. Please see the SDS of TMC-40 for detailed information.
Materials Compatibility
TMC-40 is compatible with most metals, plastics, and elastomers, please contact TMC Industries, Inc. for further recommendations and technical assistance.
Recycle and Reclaim Options
TMC Industries Inc. reclaim service provides significant savings over the cost of new fluid and helps protect the environment by drastically reducing the amount of your waste stream.
Reduce your hazardous waste disposal and achieve better environmental stewardship. TMC Industries, Inc. properly disposes of the contaminants.
Quality Assurances
We guarantee our reclaimed solvents to have new qualities and performance capabilities. To support our confidence, pre- and post-processing analytical data accompanies each shipment.
Save on Disposal Costs
Reduce your hazardous waste disposal. Have TMC Industries reclaim your contaminated fluids to their original state and purity and return them to you at about 1/3 the cost of replacing them with new fluids.
[Size Chart]
Passed 3rd Party Laboratory Testing: Non Detectable PFAS |
[End Size Chart]
[Custom Product Tab]
TMC-40 TDS Technical Datasheet |
For Safety Datasheet (SDS), please contact us! |
TMC-40 (3M™ FC-40 Drop in Replacement)
Translation missing: en.products.product.sku:95000-11
- Regular price
- $971.80
- Sale price
- $971.80
- Regular price
-