Introduction:
The low surface tension and low viscosity of TMC-7200 fluid make it ideal for use in vapor degreasing and cold cleaning applications. In addition, its chemical and thermal stability, nonflammability, and low toxicity make it useful for other industrial applications such as specialty solvent and heat transfer applications. TMC 7200 fluid has a higher boiling point than most CFCs, HCFCs, and HFCs, reducing evaporative losses.

Applications:
•CFC, HCFC, HFC, and PFC replacement agent
•Lubricant carrier, Fluorocarbons, Hydrocarbons and Silicones
•Cold cleaner (flex circuits, wipe solvent)
•Cleaning and rinsing agent for vapor-degreasing
•Specialty solvents, dispersion medium, reaction medium, extraction solvent
•Heat Transfer Fluid
•Light-duty cleaning (neat)–particulates, fluorolubes, light oils, fluoropolymers

TMC-7200 is a direct replacement for 3M™ Novec-7200.

RoHS Compliant

Entry 68 of Regulation (EU) 2021/1297 amending Annex XVII of REACH Regulation (EC) No 1907/2006

European Regulation POPs (EU) 2020/784 amending Regulation (EU) 2019/1021

Physical Properties:

Average Molecular Weight:  264g/mol
Boiling Point: 76°C
Pour Point: -138°C
Calculated Critical Temperature: 210°C
Calculated Critical Pressure: 2.01Mpa
Vapor Pressure: 109mmhg
Latent Heat of Vaporization: 119kJ/kg
Liquid Density (25°C): 1430kg/m3
Kinematic Viscosity: 0.41cSt
Absolute Viscosity: 0.58(cP)
Liquid Specific Heat: 1220J/kg-K
Coefficient of Expansion: 0.0016K-1
Surface Tension: 13.6mN/m
Dielectric Strength: >32kV
Dielectric Constant@:1kHz 7.3
Volume Resistivity: 108Ohm-cm
Solubility of Solvent in Water: <20ppm
Solubility of Water in Solvent: 92ppm
Ozone Depletion Potential: 0
GWP: 55

Thermal Conductivity of Liquids @ 25°C, ASTM D 2717, W/m.K:  0.075
Viscosity, Kinematic, at 25°C, cSt, ASTM D 445.a, cSt:  0.47
Viscosity, Kinematic, at -20°C, cSt, ASTM D 445.a, cSt:  0.81
Viscosity, Kinematic, at 0°C, cSt, ASTM D 445.a, cSt:  0.63
Density and Relative Density of Liquids by Digital Density Meter @ 25°C, Density, ASTM D 4052, g/cm3:  1.4243
Vapor Pressure-Temperature of Liquids by Isoteiscope @100°F, ASTM D 2879, psia: 3.424
Viscosity, Dynamic @ 40°C, Dynamic Viscosity, ASTM D 7042, cP:  0.561
Viscosity, Dynamic @ 100°C, Dynamic Viscosity, ASTM D 7042, cP:  0.338
Residue by Evaporation, In-House μg/mL:  <10
Pour Point of fluorinated heat transfer fluid, ASTM D 97, °F:  <-100

Materials Compatibility:
TMC-7200 fluid is compatible with most metals and hard polymers. Soft and elastomeric materials should be limited to compounds that contain the least amount of extractable plasticizer.

Recycle and Reclamation:
Why pay for expensive disposal services, when TMC Industries can reclaim your used fluorinated fluids, restoring them to like-new condition, and saving you up to 50% in replacement fluids? TMC Industries also buys and resells used fluorinated fluids. Contact us for more details.

 [Size Chart]

[Custom Product Tab]